Pulse protocol

Hardware testing before a SKU earns a shelf.

SuperSaver is a verification desk, not a bulk marketplace. Units that fail battery, RF, thermal or safety gates never reach the catalog.

Engineer running hardware verification on a test bench

How Pulse works

Four gates. One publish decision.

Every inbound sample is logged, photographed against its spec sheet, then run through the same four-gate protocol. Marketing copy is rewritten from the lab notes — claimed battery life that we cannot reproduce is replaced with the measured figure.

Compatibility is not a slogan. We pair each unit with the operating systems and protocols listed on its dossier and publish only the combinations that held for a full charge cycle.

Verification gates

The checklist behind every Pulse badge.

Incoming inspect

Serial, pack-out and labeling checked against the manufacturer dossier before power is applied.

Gate 01 See listed units

Power & thermal

Charge curves, idle draw and surface temperature logged until they stabilize within spec.

Gate 02 Ask a technician

RF & pairing

Bluetooth, Wi-Fi, Zigbee or PD handshake tested on the OS versions listed as compatible.

Gate 03 Browse by lane

Safety lock

CE, UL and RoHS marks confirmed. Cells without a listed certification never receive a Pulse badge.

Gate 04 Report a concern

Policies

Returns, warranty and freight — written plainly.

30-day returns. Unopened or lightly tested units come back with original packaging. Refunds process within 5 business days of intake.
12-month limited warranty. Manufacturing defects in cells, boards and housings are covered. Physical damage and liquid ingress are not.
Freight. Free over $75. Flat $6.99 below that. Estimated tax of 7.25% is shown in the cart preview and may vary by destination.

Circuit board close-up from the SuperSaver verification bench

Want the protocol applied to a specific SKU?

The helpdesk can pull the lab notes behind any listing on the current cycle.

Contact the desk